Sharp AR-CF2 Manual Do Utilizador
: Jan. 9 2004
1
AR-CF2 OPERATIONAL DESCRIPTION 4 - 5
The correspondence between the punching/stapling mode settings and LEDs is shown below.
∗
●
: means "Lit."
5. LED indication on operator panel
Note: For LED status, each blank means "not lit."
Punch
LED
Staple mode LEDs
Stapling mode
LED1
LED2
LED3
LED4
❍
●
❍
❍
❍
1-point stapling at back
❍
❍
●
❍
❍
2-point stapling
❍
❍
❍
●
❍
1-point stapling at front
❍
❍
❍
❍
●
Saddle stapling (saddle stitching)
●
❍
❍
❍
❍
Punching
●
●
❍
❍
❍
Punching + 1-point stapling at back
●
❍
●
❍
❍
Punching + 2-point stapling
●
❍
❍
●
❍
Punching + 1-point stapling at front
Status
Cause
Explanation
START LED
MODE LED
Red
Green
Empty tray
The selected MODE LED is lit.
Inserter problem
Finisher problem
Finisher problem
Paper jam in inserter
Lit
The LED of the selected mode is lit.
Paper jam in finisher
Lit
The LED of the selected mode is lit.
Inserter alarm
The LED of the selected mode is lit.
Finisher alarm
The LED of the selected mode is lit.
Open inserter cover
The LED of the selected mode is lit.
Open finisher cover
The LED of the selected mode is lit.
Offline operation disabled
Inserter tray specified stapling
mode non-usable
Punching non-usable
mode non-usable
Punching non-usable
The LED of the selected mode is lit.
Operation mode Stapling disabled
Punching disabled
Punching disabled
The LED of the selected mode is blinking.
Full tray (considered as a kind of
finisher alarms)
finisher alarms)
The LED of the selected mode is lit.
Other
Paper-loaded tray
(Operable)
(Operable)
Lit
The LED of the selected mode is lit.
Paper-loaded
tray(Non-operable)
tray(Non-operable)
Inserter problem
Lit
Finisher problem
Lit
The LED of the selected mode is lit.
Paper jam in inserter
Lit
Paper jam in finisher
Lit
The LED of the selected mode is lit.
Inserter alarm
Blinking
The LED of the selected mode is lit.
Finisher alarm
Blinking
The LED of the selected mode is blinking.
Paper-loaded tray
(Non-operable)
(Non-operable)
Open inserter cover
The LED of the selected mode is lit.
Open finisher cover
The LED of the selected mode is lit.
Incompatible paper size
A non-usable paper size "A4
lateral," etc. is added when
the saddle mode is selected:
Extra size
lateral," etc. is added when
the saddle mode is selected:
Extra size
Blinking
The LED of the selected mode is lit.
Offline operation disabled
Inserter tray specified stapling
mode non-usable
Punching non-usable
Inserter tray specified stapling
mode non-usable
Punching non-usable
The selected mode is non-
usable.
usable.
The LED of the selected mode is blinking.
Operation mode Stapling disabled
Punching disabled
Punching disabled
The selected mode is
disabled.
disabled.
The LED of the selected mode is blinking.
Full tray (considered as a kind of
finisher alarms)
finisher alarms)
The tray corresponding to
the selected mode is full.
the selected mode is full.
Blinking
The LED of the selected mode is blinking.
Over loaded
Blinking
The LED of the selected mode is blinking.
Paper loaded in the finisher
intermediate process tray
intermediate process tray
Blinking
The LED of the selected mode is lit.
Other
Main unit status "operation
disabled," finisher status
"non-operable," etc.
disabled," finisher status
"non-operable," etc.
The LED of the selected mode is lit.
Waiting for start of
offline operation
offline operation
After a user presses the
START switch
START switch
Blinking
The LED of the selected mode is lit.
In offline operation
Blinking The LED of the selected mode is lit.
1
1
1
1
1