Savin LD232c Manual Do Utilizador

Copying from the Bypass Tray

BBBB

Insert the paper with the side you
want to copy facing up until you
hear the beep, and align the paper
guide to the paper size.

1: Extender

Important

❒ If the guides are not flush

against the copy paper, image
skewing or misfeeds might oc-
cur.

Note

❒ Do not stack paper over the lim-

it mark, if you do image skew-
ing or misfeeds might occur.

❒ Swing out the extender to sup-

port paper sizes larger than
A4

L, 8

× 11"L.

❒ Fan paper to get air between the

sheets and avoid multi-sheet
feeds.

CCCC

Select the paper type and size.

Note

❒ When copying onto OHP trans-

parencies or thick paper, see
p.24 “When copying onto OHP
Transparencies or Thick Paper”.

❒ When copying on the back side

of paper, see p.25 “When Copy-
ing on the Back Side of the Pa-
per”.

When copying onto standard size
paper

A Press the {{{{#}}}} key.

The "Bypass Tray Paper" screen
is displayed.

B Press [Select Size].

C Select the paper size.
D Press [OK] twice.

When copying onto custom size
paper

A Press the {{{{#}}}} key.
B Press [Custom Size].

C Enter the vertical size of the pa-

per using the number keys,
and then press [#].

ZKVH130J

0827JupiterC1_Copy_EN_F1_FM.book Page 23 Thursday, September 4, 2003 5:06 PM