Savin 7700W Manual Do Utilizador

Copying

22

H

{{{{RF

}}}} key.

❒ To cancel copying, press the 

{Clear/Stop} key. The copier finishes the oper-

ation in progress, and delivers the copy and the original.

❒ To cancel on-going copying, for example, when you have inserted a wrong

blueprint, press the 

{RF Select/Cut} key. The machine interrupts the opera-

tion in progress, and delivers the copy and the original.

❒ If you make copy without pressing the 

{RF Select/Cut}key, copied paper

might come out with originial size + 310mm.

❒ When you repeat the copy job with this function even if you select different

sizes of the originals, this function helps you to make same size copy.

❒ Once you set the cut length and press the 

{RF Select/Cut} key to enter the

repeat copy cycle, do not press the key. Otherwise, the copy job will be in-
terrupted. If you want to repeat the copy job again, press the 

{Paper Feed}

key. For details about job settings, see

D.

This function cuts roll paper to a selected length. The paper is cut to this length
regardless of the original size.

❒ The default Preset Cut length is as follows. Metric Version: 1189mm, 841mm,

594mm, 420mm, 297mm Inch Version: 48.0", 42.0", 36.0", 24.0", 18.0", 11.0".  To
change of the Preset Cut length pattern, please contact your service represent-
ative.