Savin 7700W Manual Do Utilizador

Copy Settings

40

This section is for the key operators in charge of this machine. You can change
or set the machine's default settings. 

❒ For how to enter the User Tools program, press the 

{Clear Modes/Energy Saver}

key, and then press the 

{Clear/Stop} key for more than 3 seconds.

• Fusing Temperature 1–Normal(+01): Selects the fusing temperature for plain

paper.

❒ 0: Mode 1, 1: Mode 2, 2: Mode 3, 3: Mode 4, 4: Mode 5, 5: Mode 6, 6: Mode 7
❒ Default: 2
❒ For details about each mode, contact your service representative.

• Fusing Temperature 2–High (+02): Selects the fusing temperature for trans-

lucent paper.

❒ 0: Mode 5, 1: Mode 6, 2: Mode 7, 3: Mode 8
❒ Default: 0
❒ For details about each mode, contact your service representative.

• Fusing Temperature 3–Low(+03): Selects the fusing temperature for translu-

cent film.

❒ 0: Mode 2, 1: Mode 3, 2: Mode 4, 3: Mode 5
❒ Default: 1
❒ For details about each mode, contact your service representative.

• Count Up/Down(+04): The copy counter can be made to count up or count

down.

❒ 0: Count up, 1: Count down