Sharp AL-1631 Manual Do Utilizador
39
4
Using the SCANNER key to begin scanning
1
Press the SCANNER (
) key.
The unit enters scan mode.
2
Place the original you wish to scan on the document glass/SPF.
For the procedure for placing the original, see "ORIGINAL PLACEMENT"
(p.47).
(p.47).
3
Press the right copy quantity key to
display the number of the application that
you wish to use for scanning.
display the number of the application that
you wish to use for scanning.
The application numbers are initially as follows.
To check the settings, see "Scan Button Destination Setting Dialog Box"
(p.36) and then open the settings window of the Button Manager.
(p.36) and then open the settings window of the Button Manager.
• Scanning is not possible during a copy job.
• If the SCANNER (
• If the SCANNER (
) key is pressed during a print job, the scan job will
be stored.
• When scanning an original that has been placed in the SPF, only one
original can be placed unless you are using Sharpdesk.
Application
number
Application launched
SC1
Sharpdesk (Full color) (if installed)
SC2
Sharpdesk (Monochrome) (if installed)
SC3
E-mail (your standard e-mail program in the
Windows OS you are using)
Windows OS you are using)
SC4
Fax (if a fax program is installed)
SC5
OCR (if an OCR program is installed)
SC6
Microsoft Word (if installed)