Sharp AL-1655CS Manual Do Utilizador
13
1
PREPARING THE MACHINE FOR INSTALLATION
1
Be sure to hold the handles on both
sides of the machine to unpack the
machine and carry it to the installation
location.
sides of the machine to unpack the
machine and carry it to the installation
location.
2
Remove all pieces of tape shown in the illustration below and
then open the RSPF and remove the protective materials. Take
out the bag containing the TD cartridge.
then open the RSPF and remove the protective materials. Take
out the bag containing the TD cartridge.
3
Release the scan head locking switch.
The scan head locking switch is under the document glass.
If the switch is locked (
If the switch is locked (
)
, the machine will not operate. Unlock the switch
(
) as shown below.
Lock
Unlock
Grasp here and turn in
the direction of the arrow.
the direction of the arrow.
!01-Introduction.fm 13 ページ ２００４年９月２１日 火曜日 午後１時３０分