Sharp AR-M201 Manual Do Utilizador
12
CONNECTING THE POWER CORD
1
Ensure that the power switch
of the unit is in the OFF
position. Insert the attached
power cord into the power cord
socket at the rear of the unit.
of the unit is in the OFF
position. Insert the attached
power cord into the power cord
socket at the rear of the unit.
2
Plug the other end of the power cord into the nearest outlet.
POWER ON AND OFF
The power switch is located on the left side of the machine.
Power on
Turn the power switch to the "ON" position.
The ready indicator will light up and other indicators
which show the initial settings of the display will also
light up to indicate the ready condition. For the initial
settings, see "Initial settings" (below).
which show the initial settings of the display will also
light up to indicate the ready condition. For the initial
settings, see "Initial settings" (below).
You can select copy settings and press the [START] key (
) after the power
switch is turned on. Copying will start automatically.
Language setting
The first time the power is turned on after shipment from the factory, a message will
appear in English in the display prompting you to select the language. Select the
language with the [
appear in English in the display prompting you to select the language. Select the
language with the [
] key (
) or [
] key (
) and then press the [ENTER] key.
The language can also be changed in the user programs (p.57).
Initial settings
The machine reverts to the initial settings when it is first turned on, when the [CLEAR
ALL] key (
ALL] key (
) is pressed,
or when no keys are pressed for the preset "AUTO
CLEAR" time following the end of a copy job.
When the machine reverts to the initial
settings, all settings and functions selected to that point are cancelled. The "AUTO
CLEAR" can be changed in the user programs. (p.54)
CLEAR" can be changed in the user programs. (p.54)
Scanning unit (scan head)
When the machine is able to copy or scan (the ready indicator is on), the scanning unit is lit.
If you use the unit in a country other than the country where the unit
was purchased, you will need to make sure that your local power
supply is compatible with your model. If you plug the unit into an
incompatible power supply, irreparable damage to the unit will result.
was purchased, you will need to make sure that your local power
supply is compatible with your model. If you plug the unit into an
incompatible power supply, irreparable damage to the unit will result.
• Only insert the power cord into a properly grounded wall socket.
• Do not use extension cords or power strips.
• Do not use extension cords or power strips.
Copy ratio: 100%, Exposure: Automatic
Copy quantity: 0, All special copier modes: Off
Copy quantity: 0, All special copier modes: Off
Warning
Caution
READY TO COPY.
100% A4 0
100% A4 0
When in the copy mode
The main screen of copy
mode appears.
mode appears.
!001-Introduction.fm 12 ページ ２００８年３月６日 木曜日 午前１０時３２分