Sharp AR-M201 Manual Do Utilizador
MAKING COPIES
22
Originals that cannot be used in the RSPF
The following originals cannot be used. These may cause misfeeds or smudging and
unclear images.
• Transparencies, tracing paper, other transparent or translucent paper, and
unclear images.
• Transparencies, tracing paper, other transparent or translucent paper, and
photographs.
• Carbon paper, thermal paper.
• Originals that are creased, folded, or torn.
• Glued originals, cut-out originals.
• Originals with binder holes.
• Originals printed using an ink ribbon (thermal transfer printing), originals on
• Originals that are creased, folded, or torn.
• Glued originals, cut-out originals.
• Originals with binder holes.
• Originals printed using an ink ribbon (thermal transfer printing), originals on
thermal transfer paper.
Original output tray extension
When placing an original larger than A4 (8-1/2" x 11") size, pull out the original
output tray extension of the RSPF.
output tray extension of the RSPF.
Capacity of paper output tray
Paper output tray extension
When copying onto paper larger than A4 (8-1/2" x 11") size, pull out the paper output
tray extension.
tray extension.
Paper holder arm
The paper output tray has a paper holder arm. The paper holder arm presses gently
on the output paper to stack it (p.9).
on the output paper to stack it (p.9).
After removing paper, if you need to return the paper to the paper
output tray, lift up the paper holder arm and place the paper under
the arm.
output tray, lift up the paper holder arm and place the paper under
the arm.
The paper output tray can hold a
maximum of 200 pages. If more
than 200 pages are allowed to
accumulate, a paper jam may occur.
maximum of 200 pages. If more
than 200 pages are allowed to
accumulate, a paper jam may occur.
Note
!AR-M201.book 22 ページ ２００８年２月１２日 火曜日 午後７時４１分