Savin SDC326 Manual Do Utilizador
Setting Originals of Different Sizes in the Document Feeder
21
1
Setting Originals of Different Sizes in the
Document Feeder
Document Feeder
Preparation
To use this function, you have to select ADF Mixed Sizes mode with the user
tools.
tools.
⇒ P.184 “Duplex/ADF/Sorter”.
You can insert a stack of originals of different standard sizes (e.g. A4, B5 etc.) into
the document feeder. These originals are individually fed onto and removed
from the exposure glass.
the document feeder. These originals are individually fed onto and removed
from the exposure glass.
Limitation
❒ The weight of originals that can be set with this function is 52 - 81g/m
2
, 14 -
20 lb.
❒ Smaller size originals might be skewed a little.
Note
❒ If your stack of originals contains pages of different sizes, make sure that:
• Longer originals are at the bottom of the stack, and shorter originals are at
the top.
• All originals are flush with the back fence of the document feeder.
A
Align the rear and left edges of the originals as shown in the illustration.
1.
Document feeder feed direction.
2.
Vertical size
B
Adjust the guide to the widest original size.
C
Set the aligned originals face up into the document feeder.
Gcgenk0n.eps