Olivetti D-COPIA 300MF Manual Do Utilizador

If the touch panel displays any of these messages, follow the 
corresponding procedure.

Is the acceptable staple 
count exceeded? For details, 
refer to Specifications on 
page Appendix-6.

Press [Continue] to print without 
using Staple.
Press [Cancel] to cancel the job.

—

Is the indicated cassette out 
of paper?

Load paper.

Is the paper of the selected 
size loaded in the Multi 
Purpose Tray?

Load the paper in the Multi 
Purpose Tray which is of the size 
and type indicated on the touch 
panel.

Has any of the built-in 
finisher, center binding 
finisher, document finisher or 
3,000-sheet capacity 
document finisher run out of 
staples?

If the staples are depleted, the 
machine will stop and the location 
of staple depletion will be indicated 
on the touch panel.
Leave the machine on and follow 
the instruction to replace the staple 
case. Press [Continue] to print 
without using Staple.
Press [Cancel] to cancel the job.

–

Replace the toner container.

–

Internal error has occurred.
Turn the main power switch off and 
on.
If error occurs repeatedly, make a 
note of the error code displayed on 
the touch panel, and contact your 
Service Representative.

—

–

Document box is full, and no 
further storage is available. This 
job is canceled. Press [End].

—

–

Repeat Copy box is full, and no 
further repeat copy is available.
Press [Continue] to print without 
using Repeat Copy.
Press [Cancel] to cancel the job.

—