Olivetti D-COPIA 300MF Manual Do Utilizador
Preparation before Use
OPERATION GUIDE
2-11
6
Press [Subnet Mask] and enter address using the numeric keys.
7
Press [Default Gateway] and enter address using the numeric keys.
8
Check that all addresses are entered correctly, and press [OK].
9
Press the Power key, and after confirming that the Power key/indicator
and memory indicator have turned off, turn the main power switch off and
on.
and memory indicator have turned off, turn the main power switch off and
on.
Setting TCP/IP (When Using DHCP)
Follow the steps below to set TCP/IP when DHCP server is available.
1
Press the System Menu key.
2
Press [System], [Change] of Network and then [Change] of TCP/IP.
3
Press [On] of TCP/
IP and [On] of
DHCP.
IP and [On] of
DHCP.
4
Press [OK].
5
Press the Power key, and after confirming that the Power key/indicator
and memory indicator have turned off, turn the main power switch off and
on.
and memory indicator have turned off, turn the main power switch off and
on.
System - TCP/IP
Use TCP/IP.
On
Off
Cancel
OK
Status
10/5/2006 10:10
DHCP
On
Off
IP Address
Subnet Mask
Default
Gateway
0.0.0.0
0.0.0.0
0.0.0.0