Savin DSc332 Manual Do Utilizador
Placing Originals
15
1
Placing Originals in the Auto
Document Feeder
Document Feeder
Settings should be made accordingly
in the following situations:
in the following situations:
❖
❖
❖
❖ When placing originals consisting of
more than 80 pages:
p.15 “Batch”
❖
❖
❖
❖ When placing originals one by one:
p.16 “SADF”
❖
❖
❖
❖ When placing originals of the same
width but different sizes:
p.17 “Placing originals of mixed
sizes”
sizes”
❖
❖
❖
❖ When placing custom size originals:
p.17 “Placing custom size origi-
nals”
nals”
Note
❒ Do not stack originals above the
limit mark on the side guide of the
ADF.
ADF.
❒ The last page should be on the bot-
tom.
❒ Do not place objects on the sensors
or cover them with your hands, or
the original size may not be detect-
ed properly. Also, do not place any-
thing on the exposure glass cover as
this could cause a malfunction.
the original size may not be detect-
ed properly. Also, do not place any-
thing on the exposure glass cover as
this could cause a malfunction.
1.
Sensors
AAAA
Set the document guide to the
original size.
original size.
BBBB
Place the aligned originals face
up into the ADF.
up into the ADF.
1.
Limit mark
2.
Document guide
Note
❒ Straighten any curls in the orig-
inals before placing them in the
ADF.
ADF.
❒ To prevent multiple sheets from
being fed at once, fan the origi-
nals before placing them in the
ADF.
nals before placing them in the
ADF.
❒ Place the originals squarely.
Batch
The Batch mode enables you to copy
originals of more than 80 pages as a
single document, even if you place
the originals into the ADF in install-
ments.
originals of more than 80 pages as a
single document, even if you place
the originals into the ADF in install-
ments.
Important
❒ Place special originals, such as
translucent paper, one by one.
0827JupiterC1_Copy_EN_F1_FM.book Page 15 Thursday, September 4, 2003 5:06 PM