Panasonic KX-MB3020 Manual Do Utilizador
9. Programmable Features
61
Setting the ring pattern for fax
(Distinctive Ring feature)
{#}{
(Distinctive Ring feature)
{#}{
4}{3}{1}
{
1} “
A”
{
2} “
B”
{
3} “
C”
{
4} “
D”
{
5} “
B-D” (default)
See page 53 for details.
Setting auto reduction
feature
{#}{
feature
{#}{
4}{3}{2}
To receive a fax document that is longer than your recording paper.
{
{
0} “
OFF”: The unit will print received documents at their original size.
{
1} “
ON” (default): The unit will fit received documents onto your recording
paper.
Changing the fax activation
code
{#}{
code
{#}{
4}{3}{4}
If you wish to use an extension telephone to receive faxes, activate this feature
and program the activation code.
and program the activation code.
Important:
L
The fax activation code must be different from the code that you
programmed on the answering machine.
programmed on the answering machine.
{
0} “
OFF”
{
1} “
ON” (default)
1. {Menu} i {#}{4}{3}{4}
2. Press {1} to select “
ON”. i {Set}
3. Enter your code from 2 to 4 digits, using 0–9, {*} and {#}.
L
The default code is “;
#9”.
L
Do not enter “0000”.
4. {Set} i {Menu}
Setting the memory reception
alert
{#}{
alert
{#}{
4}{3}{7}
To alert you with a beeping sound when a received fax document is stored into
memory due to some existing problem.
{
memory due to some existing problem.
{
0} “
OFF”: Deactivates this feature.
{
1} “
ON” (default): You will hear a beeping sound.
Note:
L
The slow beeps will continue until you solve the printing problem and make
sure the unit is supplied with enough paper to print the stored document.
sure the unit is supplied with enough paper to print the stored document.
Setting friendly reception
{#}{
{#}{
4}{3}{8}
To receive a fax automatically when you answer a call and hear a fax calling
tone (slow beep).
{
tone (slow beep).
{
0} “
OFF”: You have to press {Start}, and then {2} for fax reception.
{
1} “
ON” (default): You do not have to press {Start}, and then {2} for fax
reception.
Setting the paper input tray to
use for printing received
faxes
{#}{
use for printing received
faxes
{#}{
4}{4}{0}
This feature will be displayed only when the lower input tray is installed (page
74).
{
74).
{
1} “
#1”: Standard input tray
{
2} “
#2”: Lower input tray
{
3} “
AUTO” (default): The unit will automatically select the standard input tray or
the lower input tray according to the paper size of the received faxes.
Note:
L
To select “
#2”, select “PLAIN PAPER” or “THIN PAPER” for the recording
paper type setting (feature #383 on page 57).
Feature/Code
Selection