Samsung SCX-5115 Manual Do Utilizador
P
APER
H
ANDLING
3.9
3
Setting the Paper Size for Copying
After loading paper in the paper Tray or the Multi-Purpose Tray,
you need to set the correct paper size using the control panel
buttons. These settings will apply to the Copy mode, and the Fax
mode (SCX-5315F only). In PC printing mode, you have to select
the paper size in the application program you use.
you need to set the correct paper size using the control panel
buttons. These settings will apply to the Copy mode, and the Fax
mode (SCX-5315F only). In PC printing mode, you have to select
the paper size in the application program you use.
To set the paper size for Tray, take the following steps:
1
Press Menu/Exit and then System Data from the one-
touch dial keypad. SCX-5115 users should press Menu and
then Enter.
touch dial keypad. SCX-5115 users should press Menu and
then Enter.
The display shows “CASSETTE PAPER” on the top line and
the available options on the bottom line. The current setting
blinks.
the available options on the bottom line. The current setting
blinks.
2
Use or to select the paper size you are using, and press
Mode/Enter (Enter for SCX-5115) to save the selection.
Mode/Enter (Enter for SCX-5115) to save the selection.
You can press the corresponding number shown on the
display to select the paper size.
display to select the paper size.
3
To return to Standby mode, press Stop/Clear.
To set the paper size for the Multi-Purpose Tray, take the
following steps:
following steps:
1
Press Menu/Exit and then System Data from the one-
touch dial keypad. SCX-5115 users should press Menu and
then Enter.
touch dial keypad. SCX-5115 users should press Menu and
then Enter.
The display shows “CASSETTE PAPER” on the top line and
the available options on the bottom line.
the available options on the bottom line.
2
Use to display “BYPASS TRAY” on the top line. The
available options appear on the bottom line and the current
setting blinks.
available options appear on the bottom line and the current
setting blinks.
3
Use or to select the paper size you are using, and press
Mode/Enter (Enter for SCX-5115) to save it.
Mode/Enter (Enter for SCX-5115) to save it.
You can press the corresponding number shown on the
display to select the paper size.
display to select the paper size.
4
To return to Standby mode, press Stop/Clear.