Samsung SF-560 Manual Do Utilizador
B
ASIC
F
UNCTIONS
2.7
2
Receiving Automatically in Fax Mode
Your machine is preset to Fax mode at the factory. If you have changed the
receiving mode, take the following steps to receive faxes automatically:
receiving mode, take the following steps to receive faxes automatically:
1
Press Receive Mode.
2
Press and hold Receive Mode until “Fax” displays on the bottom line.
You may have to repeat this action once or twice depending on the
mode you’re in.
mode you’re in.
3
When you receive a fax, the machine answers the call on a specified
number of rings and automatically receives the fax.
number of rings and automatically receives the fax.
To change the number of rings, see page 1.20.
Receiving Manually in Tel Mode
You can receive a fax call manually with the Start key.
1
Press the On Hook Dial key or lift the external handset.
2
Press Start Copy/Fax, then the “1.Sending 2.Receiving” message
appears on the display.
appears on the display.
3
Press 2 by using the numer keypad for receiving.
4
Press Enter to start fax receiving.
The machine begins receiving a fax and returns to Standby Mode when
the reception is completed.
the reception is completed.
Receiving Automatically in Ans/Fax Mode
For using this mode, you must attach an answering machine to the EXT jack
on the back of your machine. See page 1.11.
on the back of your machine. See page 1.11.
1
Press Receive Mode.
2
Press and hold Receive Mode until “Ans/Fax” displays on the bottom
line.
line.
You may have to repeat this action once or twice depending on the
mode you’re in.
mode you’re in.
3
When you receive a call, the answering machine answers.
If the caller leaves a message, the answering machine stores the
message as it would normally. If your machine hears a fax tone on the
line, it automatically starts to receive the fax.
message as it would normally. If your machine hears a fax tone on the
line, it automatically starts to receive the fax.