Samsung 5100 Manual Do Utilizador
4.2
Advanced fax
Delayed fax
You can set your machine to send a fax at a later time when you will not
be present.
be present.
1. Load the document face down. If necessary, adjust
Resolution
, or
Contrast
. For details, see page 3.2.
2. Press
Advanced FAX
on the control panel.
The display shows the first menu; BROADCASTING.
3. Press ➛ or ❿ until ‘DELAYED FAX’ appears, then press
Start/Enter
.
4. Enter the number of the remote machine, then press
Start/Enter
.
To enter the number, you can also press a one-touch button including
Group dial button. Otherwise, press
Group dial button. Otherwise, press
Speed,
enter a 2-digit speed dial
number, then press
Start/Enter
. The stored number appears on the
display.
5. Press
Start/Enter
to confirm the number. The display asks you to
enter another fax number to send the document to another location.
Note: If ‘MEMORY FULL’ occurs while scanning into the memory, the display
will show:
Press
➛
or
❿
to select the option you want. If you select CANCEL,
broadcasting is cancelled. If you select DONE, your machine performs
broadcasting only with the pages already scanned.
broadcasting only with the pages already scanned.
If an error occurs while sending to a specific number, the machine trans-
mits the document to all the other numbers, then retries the number that
previously recorded an error. After completing transmission, your machine
prints the multi-communication report.
mits the document to all the other numbers, then retries the number that
previously recorded an error. After completing transmission, your machine
prints the multi-communication report.
JOB ❿CANCEL ❿DONE
05-Advanced 12/10/99 5:59 AM Page 4