Samsung CLX-6250 Manual Do Utilizador

Faxing_ 3

When you want to cancel a fax job, press Stop/Clear at any time while 

sending.

When the last page of your original has been sent successfully, the machine 

beeps and returns to ready mode.
When something goes wrong while sending your fax, an error message 

appears on the display. For a list of error messages and their meanings, see 

"Understanding display messages" on page 8. If you receive an error 

message, press Stop/Clear to clear the message and try to send the fax 

again.
You can set your machine to print a confirmation report automatically each 

time sending a fax is completed. For further details, see "Printing sent fax 

report automatically" on page 9.

When the number you have dialed is busy or there is no answer when you 

send a fax, the machine automatically redials the number. The redial time 

depends on the country's factory default setting. To change the time interval 

between redials and the number of redial attempts (See "Changing the fax 

setup options" on page 1).
When the display shows Retry Redial?, press OK to redial the number 

without waiting. To cancel the automatic redialing, press Stop/Clear.

To redial the number you called last:
1. Press Redial/Pause on the control panel.
2. When an original is loaded in the document feeder, the machine 

automatically begins to send.
If an original is placed on the scanner glass, select Yes to add another 

page. Load another original and press OK. When you have finished, 

select No when Another Page? appears.

You can use the Multiple Send feature, which allows you to send a fax to 

multiple locations. Originals are automatically stored in memory and sent to 

a remote station. After transmission, the originals are automatically erased 

from memory. You cannot send a color fax using this feature.

1. Press 

 (Fax) on the control panel.

2. Load originals face up into the document feeder, or place a single 

original face down on the scanner glass.

3. Adjust the resolution and the darkness to suit your fax needs (See 

4. Press Menu on the control panel.
5. Press the up/down arrow to highlight Fax Feature and press OK.
6. Press the up/down arrow to highlight Multi Send and press OK.
7. Enter the number of the first receiving fax machine and press OK.

You can press speed dial numbers or select group dial number using 

Address book button. For details, see "Setting up address book" on 

8. Enter the second fax number and press OK.

The display asks you to enter another fax number to send the document.

9. To enter more fax numbers, press OK when Yes highlights and repeat 

steps 7 and 8. You can add up to 10 destinations.

10. Press OK to start storing the scanned original data into memory.

Once you entered a group dial number, you cannot enter another 

group dial numbers anymore.

11. When you have finished entering fax numbers, press the left/right arrow 

to select No when Another Page? appears.

12. If an original is placed on the scanner glass, select Yes to add another 

pages. Load another original and press OK.
When you have finished, select No when Another Page? appears.
The machine begins sending the fax to the numbers you entered in the 

order in which you entered them.

You can set your machine to send a fax at a later time when you will not be 

present. You cannot send a color fax using this feature.

1. Press 

 (Fax) on the control panel.

2. Load originals face up into the document feeder, or place a single 

original face down on the scanner glass.

3. Adjust the resolution and the darkness to suit your fax needs (See 

"Adjusting the document settings" on page 6).

4. Press Menu on the control panel.
5. Press the up/down arrow to highlight Fax Feature and press OK.
6. Press the up/down arrow to highlight Delay Send and press OK.
7. Enter the number of the receiving fax machine and press OK.

You can press speed dial numbers or select group dial number using 

Address book button. For details, see "Setting up address book" on 

page 7.

8. The display asks you to enter another fax number to send the document.
9. To enter more fax numbers, press OK when Yes highlights and repeat 

steps 7. You can add up to 10 destinations.

Once you entered a group dial number, you cannot enter another 

group dial numbers anymore.

10. When you have finished entering fax numbers, press the left/right arrow 

to select No when Another Page? appears and press OK.

11. Enter the job name you want and press OK.

For details on how to enter alphanumeric characters, see "Entering 

characters using the number keypad" on page 2.
If you do not want to assign a name, skip this step.

12. Enter the time using the number keypad and press OK.

If you set a time earier than the current time, the fax will be sent at 

that time on the following day.

The original is scanned into memory before transmission.

13. If an original is placed on the scanner glass, select Yes to add another 

pages. Load another original and press OK.
When you have finished, select No when Another Page? appears.
The machine returns to ready mode. The display reminds you that you 

are in ready mode and that a delayed fax is set.

You can add additional documents to the delayed fax job which is saved 

in memory.
1.Load the originals to be added and adjust document settings.
2.Press Menu on the control panel.
3.Press the up/down arrow to highlight Fax Feature and press OK.
4.Press the up/down arrow to highlight Add Pages and press OK.
5.Press the up/down arrow until the fax job you want appears and press 

OK.
When you have finished, select No when Another Page? appears. 

The machine scans the original into memory.