Sharp AR-NB3 Manual Do Utilizador

The key operator programs are used to prohibit changes to the [Condition Settings] and to configure interface settings.

•

: Select the setting for which you wish to prohibit changes.

•

: Enable monitoring of data sent to the network port and set restrictions.

The "Default Settings" 
screen of the [Key 
operator programs] will 
appear. If you wish to 
select a setting in the 
"Default Settings" screen, 
go to step 3.

See 

 for descriptions of 

the settings.

When "YES, NO" appears in the "Settings" column, "YES" is selected when a checkmark appears in the checkbox of 
the item, and "NO" is selected when checkmark does not appear.

Prohibit Test Page Printing

YES, NO

This setting is used to prohibit printing of a printer test page.

Disable Default Setting 
Changes

YES, NO

This setting is used to prohibit changes to the default 
condition settings.

Disabling of Clock 
Adjustment

YES, NO

This setting is used to prohibit changes to the date and time 
settings. This item does not appear when the fax option is installed.

Hexadecimal Dump 
Mode

YES, NO

This program is used to print out the print data from the 
computer in hexadecimal and in the corresponding text 
characters (based on ASCII code). This allows you to 
check whether or not print data is being correctly sent from 
the computer.

I/O Timeout

1- 60 - 999 (sec)

During reception of a print job, if remaining data is not 
received after the time set here elapses, the port 
connection is broken and the next print job is begun.

Emulation Switching

Auto*, PostScript*, PCL

Select the printer language. When [Auto] is selected, the 
language is automatically selected from the data sent to 
the printer. Unless errors occur frequently, do not change 
the setting from [Auto] to another setting.
*Only when the PS3 expansion kit is installed.

Port Switching Method

Switch at End of Job, 
Switch after I/O Timeout

Select the method for switching network ports.