Sharp AR-NB3 Manual Do Utilizador
33
KEY OPERATOR PROGRAMS
5
SPECIAL SETTINGS
IP address settings
This program is used to set the "IP ADDRESS", "SUBNETMASK", and "DEFAULT GATEWAY". The following
screen appears when this program is selected.
screen appears when this program is selected.
1
Enter the IP address, subnet mask,
and default gateway.
and default gateway.
2
When you have completed all
settings, press the [OK] key.
settings, press the [OK] key.
The settings will be saved.
3
Turn off the machine power, wait for a
few seconds, and then turn on the
power again.
few seconds, and then turn on the
power again.
The new settings will take effect after the power is
turned on.
turned on.
IP ADDRESS SETT-
INGS
IP ADDRESS
INGS
IP ADDRESS
0
0 0 0
[
][
] keys
These move the cursor up and
down to select "IP ADDRESS",
"SUBNETMASK", and
"DEFAULT GATEWAY".
down to select "IP ADDRESS",
"SUBNETMASK", and
"DEFAULT GATEWAY".
[
][
] keys
These move the cursor left
and right.
and right.
Numeric keys
These are used to enter
numbers.
numbers.
[C] key (
)
Use this to cancel an entry.
[BACK] key
This cancels an entry and
returns you to the previous
screen.
returns you to the previous
screen.
[CA] key (
)
This cancels the setting and
returns the display to the
base screen of the mode that
was in effect before the key
operator programs were
entered.
returns the display to the
base screen of the mode that
was in effect before the key
operator programs were
entered.
[SPECIAL
FUNCTION] key
This cancels the setting and
returns the display to the
base screen of the mode that
was in effect before the key
operator programs were
entered.
returns the display to the
base screen of the mode that
was in effect before the key
operator programs were
entered.