Xerox M24 Manual Do Utilizador

4–9

U

S E R

 G

U I D E

 (M

A C H I N E

 A

D M I N I S T R A T O R

)

Sets the time to wait before returning the Control Panel to the 
default screen. The amount of time until reset can be set to: 

•

0 
OR

•

60 ~ 240 seconds, in 60-second increments.  

Enter the value using the numeric keypad on the Control Panel. 
The default is 60 seconds.

Tells the machine to release the current job to enable the 
execution of the next job when a fault occurs during copying or 
scanning. The job can be executed only in parts of the machine 
that are functioning normally. Set the time to: 

•

0 - do not automatically release the job.

•

240 ~ 5940 seconds (4 ~ 99 minutes) in 60-second 
increments.

Enter the value using the numeric keypad on the Control Panel. 
The default is 600 seconds.

Allows the machine to automatically start print jobs when there 
has been no activity for a set amount of time.  Set the time to:

•

1 ~ 240 seconds in 1-second increments.  

Enter the value using the number keys on the Control Panel. The 
default setting is 10 seconds.

Low Power Mode and Sleep Mode are part of the energy-saving 
mode.  As time lapses, the machine lowers power consumption: 
Last Operation -> Low Power Mode -> Sleep Mode. 

•

Set the time to Low Power Mode from 6 ~ 240 minutes and 

•

Set the time to Sleep Mode from 0 ~ 234 minutes

Both are set in 1 minute increments.