Xerox M24 Manual Do Utilizador
4–46
U
S E R
G
U I D E
(M
A C H I N E
A
D M I N I S T R A T O R
)
Receiving Buffer-SMB
Spool
Choose from the following options:
•
Off - Spooling is not performed.
While the machine is processing or printing SMB data from a
client, it cannot receive other data from other clients through
the same interface. The SMB reception buffer can be set for
64 ~ 1024 KB, in increments of 32 KB. The default is 256 KB.
While the machine is processing or printing SMB data from a
client, it cannot receive other data from other clients through
the same interface. The SMB reception buffer can be set for
64 ~ 1024 KB, in increments of 32 KB. The default is 256 KB.
•
Memory - Spooling is performed.
Memory is used as the reception buffer for the spooling
process. The size of the reception buffer can be set between
512 KB ~ 32.00 MB, in increments of 0.25 MB. The default is
1.00 MB.
Memory is used as the reception buffer for the spooling
process. The size of the reception buffer can be set between
512 KB ~ 32.00 MB, in increments of 0.25 MB. The default is
1.00 MB.
NOTE:
Printing data bigger than the set memory size cannot be
received. If this happens, select Hard Disk Spooling or Spooling
Off.
Off.
•
Hard Disk - Spooling is performed.
Hard drive is used as the reception buffer for the spooling
process.
Hard drive is used as the reception buffer for the spooling
process.
The default is Off.
Receiving Buffer-IPP Spool
Choose from the following options:
•
Off - Spooling is not performed.
While the machine is processing or printing IPP data from a
client, it cannot receive other data from other clients through
the same interface. The IPP reception buffer can be set
between 64 ~ 1024 KB, in increments of 32 KB. The default is
256 KB.
While the machine is processing or printing IPP data from a
client, it cannot receive other data from other clients through
the same interface. The IPP reception buffer can be set
between 64 ~ 1024 KB, in increments of 32 KB. The default is
256 KB.
•
Hard Disk - Spooling is performed.
Hard drive is used as the reception buffer for the spooling
process.
Hard drive is used as the reception buffer for the spooling
process.
The default is Off.
Receiving Buffer-EtherTalk
Set the reception buffer for EtherTalk.
The size can be set between 64 ~ 1024 KB, in increments of 32
KB. The default is 256 KB.
The size can be set between 64 ~ 1024 KB, in increments of 32
KB. The default is 256 KB.
Receiving Buffer - Port9100
Set the reception buffer for Port9100.
The size can be set between 64 ~ 1024 KB, in increments of 32
KB. The default is 256 KB.
The size can be set between 64 ~ 1024 KB, in increments of 32
KB. The default is 256 KB.