Xerox M24 Manual Do Utilizador
![Xerox](https://files.manualsbrain.com/attachments/0fe48d1f322308ffbf3238e7957ca0f7e8effce1/common/fit/150/50/5364c62dbb9b24e511428c3c1ad3cb3313d9aff7b5c826e56a00b9e021df/brand_logo.png)
1–48
U
S E R
G
U I D E
(C
O P I E R
)
Border Erase
The Border Erase feature enables you to eliminate unwanted
marks near the edges of the original from the output copy. The
range for Border Erase is 0 through 50mm in 1mm increments.
Border Erase options can be used individually or combined
together:
marks near the edges of the original from the output copy. The
range for Border Erase is 0 through 50mm in 1mm increments.
Border Erase options can be used individually or combined
together:
Top & Bottom
For Normal the default is 2mm. For Variable Erase the default is
5mm.
5mm.
Left & Right
For Normal the default is 2mm. For Variable Erase the default is
5mm.
5mm.
Center
The default is 0mm.
The selected settings are applied to both sides of 2-sided copies.
When the image is reduced or enlarged, the selected percentage
will be applied to the Border Erase. For example, if Variable Erase
is set to 30mm, a 50% reduction will result in 15mm of border
erase on the output.
When making copies the copier adds a margin of 2mm to all sides.
This cannot be eliminated.
The selected settings are applied to both sides of 2-sided copies.
When the image is reduced or enlarged, the selected percentage
will be applied to the Border Erase. For example, if Variable Erase
is set to 30mm, a 50% reduction will result in 15mm of border
erase on the output.
When making copies the copier adds a margin of 2mm to all sides.
This cannot be eliminated.