Toshiba e Studio45/35 Manual Do Utilizador
5
Setting up PostScript and/or PCL printing with Windows 95/98/Me
Completing the Windows 95/98/Me printer connection
To print from Windows 95/98/Me you need to:
• Set up network servers, if any
• Set up the GA-1040 to accept print jobs from your computer
• Configure a port on each Windows computer for the network
Completing the Windows 95/98/Me parallel port connection
Preparing a parallel port connection for Windows 95/98/Me requires specific BIOS
settings on your computer, and specific port and printer settings for
Windows 95/98/Me. In addition, a change to one of the GA-1040 Setup settings may
be required if you choose to spool files to the GA-1040 rather than print directly.
settings on your computer, and specific port and printer settings for
Windows 95/98/Me. In addition, a change to one of the GA-1040 Setup settings may
be required if you choose to spool files to the GA-1040 rather than print directly.
T
O
PREPARE
THE
GA-1040
AND
YOUR
COMPUTER
FOR
PARALLEL
PORT
PRINTING
1.
Connect the GA-1040 to the parallel port on your computer.
For instructions, see the Configuration Guide.
2.
In Network Setup>Port Setup>Parallel Port Setup, set Enable Parallel Port to Yes.
For more information about GA-1040 Setup, see the Configuration Guide.
3.
If you want to spool files to the GA-1040, set Port Timeout in Seconds to 10.
If you want to print directly to the GA-1040, set Port Timeout in Seconds to 5.
If you want to print directly to the GA-1040, set Port Timeout in Seconds to 5.
Setting this option to 10 seconds ensures that spooling is not interrupted due to
timeout.
timeout.
To do this:
See:
Configure the parallel connection
Configure the IPX (Novell) connection