Toshiba e Studio45/35 Manual Do Utilizador
55
Setting up the GA-1040 as a PostScript printer
Setting up the GA-1040 in the Chooser
After you install the Adobe PostScript printer driver and PPD file (see “Setting up the
GA-1040 as a PostScript printer” on page 53), you need to set up the GA-1040 in the
Chooser in order to take full advantage of its features. This section describes how to set
up the GA-1040 with the AdobePS printer driver.
GA-1040 as a PostScript printer” on page 53), you need to set up the GA-1040 in the
Chooser in order to take full advantage of its features. This section describes how to set
up the GA-1040 with the AdobePS printer driver.
T
O
SET
UP
THE
GA-1040
IN
THE
C
HOOSER
1.
Select Chooser from the Apple menu.
Make sure AppleTalk is set to Active.
2.
Select the correct AppleTalk Zone, if necessary.
3.
Click the AdobePS icon.
The GA-1040 appears in the Select a PostScript Printer list in the form of <server
name>_<device name>_<print connection>. The device name (GA-1040) is the
internal name of your printer.
name>_<device name>_<print connection>. The device name (GA-1040) is the
internal name of your printer.
N
OTE
:
Only the print connections (Direct, Hold, and Print) that have been enabled in
Setup appear in the Chooser.