Motorola CPX8000 Manual Do Utilizador
2-4
Computer Group Literature Center Web Site
CPU Modules
2
Connectors and Jumper Settings
The next sections provide pinout information and jumper settings for the
CPX750HA board. Additional pinout assignments can be found in
Chapters 3 through 6.
CPX750HA board. Additional pinout assignments can be found in
Chapters 3 through 6.
Backplane Connectors (P5, P4, P3, P2, P1)
Refer to the backplane reference section for the backplane connector pin
assignments.
assignments.
Front USB Connectors (J17 and J18)
Two USB Series A receptacles are located at the front panel of the
CPX750HA board. The pin assignments for these connectors are as
follows:
CPX750HA board. The pin assignments for these connectors are as
follows:
10BaseT/100BaseTx Connector (J8)
The 10BaseT/100BaseTx Connector is an RJ45 connector located on the
front panel of the CPX750HA board. The pin assignments for this
connector are as follows:
front panel of the CPX750HA board. The pin assignments for this
connector are as follows:
Table 2-2. USB 0 Connector J18
1
UVCC0
2
UDATA0N
3
UDATA0P
4
GND
Table 2-3. USB 1 Connector J17
1
UVCC1
2
UDATA1N
3
UDATA1P
4
GND