Motorola LS9203 Manual Do Utilizador

9-50

The length of a code refers to the number of characters (i.e., human readable characters), including check digit(s) the code contains. 
Lengths for Code 39 may be set for any length, one or two discrete lengths, or lengths within a specific range. If Code 39 Full ASCII 
is enabled, Length Within a Range or Any Length are the preferred options.

When setting lengths for different bar code types by scanning single digit numbers, single digit numbers 
must always be preceded by a leading zero.

One Discrete Length - This option allows the scanner to decode only those Code 39 symbols containing a selected length. Lengths 
are selected from the numeric bar codes beginning on page 

. For example, to decode only Code 39 symbols with 14 characters, 

scan Code 39 - One Discrete Length, then scan 1 followed by 4. If an error is made or to change a selection, scan Cancel on 
page 

Two Discrete Lengths - This option allows the scanner to decode only those Code 39 symbols containing either of two 
selected lengths. Lengths are selected from the numeric bar codes beginning on page 

example, to decode only those Code 39 symbols containing either 2 or 14 characters, select Code 39 - Two Discrete Lengths, 
then scan 0, 2, 1, and then 4. If an error is made or to change a selection, scan Cancel on page 

Note