Motorola LS9203 Manual Do Utilizador

9-87

The length of a code refers to the number of characters (i.e., human readable characters), including check digit(s) the code contains. 
Lengths for MSI may be set for any length, one or two discrete lengths, or lengths within a specific range. 

When setting lengths for different bar code types by scanning single digit numbers, single digit numbers 
must always be preceded by a leading zero.

One Discrete Length - This option allows the scanner to decode only those MSI symbols containing a selected length. Lengths are 
selected from the numeric bar codes beginning on page 

. For example, to decode only MSI 

symbols with 14 characters, scan MSI - One Discrete Length, then scan 1 followed by 4. If an error is made or to change a 
selection, scan Cancel on page 

Two Discrete Lengths - This option allows the scanner to decode only those MSI symbols containing either of two selected 
lengths. Lengths are selected from the numeric bar codes beginning on page 

 in 

. For example, to 

decode only those MSI symbols containing either 2 or 14 characters, select MSI - Two Discrete Lengths, then scan 0, 2, 1, and 
then 4. If an error is made or to change a selection, scan Cancel on page 

.

Note