Brother MFC-9650 Manual Do Utilizador

C H A P T E R   F I V E

3. Fax/Tel (F/T)

Use this function if you expect to receive
many fax messages and seldom phone
calls. The machine automatically answers
every call. If the call is a fax, it prints the
fax. If the call is not a fax, it signals you
with an F/T pseudo-ring, different from the
phone company ringing, to alert you to
pick up the call. If you select this setting,
you’ll need to set the Ring Delay and F/T
Ring Time features (on the following
pages).

4. TAD

This is the only setting in which you can
use an external answering machine. Your
telephone answering device is connected to
your machine, and answers every call.
Once the external telephone answering
device (TAD) answers, the machine listens
for fax tones. If it detects fax tones, fax
messages are printed.

The TAD setting works only with an external telephone answering device
(TAD). Ring Delay and F/T Ring Time do not work in this setting.

When you set the Answer Mode to manual (the 

 and 

 lights are

both off), you must answer each incoming call yourself. Select this mode
by pressing 

 key. Here is what you should do when using Manual

Mode:

1. Regular phone call

Talk as you normally would.

2. Phone call and

Press 

when finished talking, and

request to send a fax

replace the external telephone’s handset.
NOTE: Sender must also press Start.

3. Fax tone...

Wait until the fax machine takes over the
call or press 

.

You can automatically receive all your faxes in Automatic Fax Reception
mode (

 light is on). Select this mode by pressing 

.

TAD

Fax

F/T

TAD

Fax

F/T

)

(

with an
External
Telephone