Brother MFC-9650 Manual Do Utilizador

T E L E P H O N E   ( V O I C E )   O P E R A T I O N

When the screen displays the name you want to call, press 

 to

begin dialling.

Pick up the external telephone’s handset and press 

 when the other

party answers. (The speaker works only one way; the other party
won’t be able to hear you unless you pick up the external telephone’s
handset.)

When the call is over, hang up.

You  can store very long dialling sequences by dividing them and setting
them up as One Touch and Speed Dial numbers. Then while dialling, you
can combine two or more One Touch and/or Speed Dial numbers and
even include manual dialling using the dial pad. You can use these
numbers in any combination. The combined number will be dialled, in
the order you entered it, as soon as you press 

.

For example:
You store “555” on One Touch key 

 and “7000” on One Touch key 

.

If you press One Touch 

, 

 and 

, you can dial “555-7000”. To

temporarily change a number, you can substitute part of the number with
manual dialling using the dial pad. So, if you press One Touch 

 and

press “7001” using the dial pad, you can dial “555-7001”.

Using access codes is easy. Sometimes you may want to choose from
among several long distance carriers when you make a call; rates may
vary depending upon the time and destination. To take advantage of low
rates, you can store the access codes or long-distance carriers as One
Touch and Speed Dial numbers.

If you have pulse dialling service, but need to send tone signals (for
telephone banking, for example), follow the directions below. If you
have touch tone service, you do not need this feature to send tone
signals.

Lift the external telephone’s handset.

Press 

. Any digits dialled after this sends tone signals.

When you hang up, the machine returns to pulse dialling service.

When you share one line for your telephone and fax machine, in the
Fax/Tel (F/T) Mode, the fax machine can determine whether an
incoming call is a fax or a telephone call.