Toshiba e-STUDIO451c Manual Do Utilizador
June 2005 © TOSHIBA TEC
e-STUDIO281c/351c/451c ADJUSTMENT
3 - 7
3
[Procedure to key in adjustment values]
In accordance with the procedure described below, make adjustment of each adjustment item so that
the measured values obtained from test copies satisfy the specification. By pressing the [FAX] button,
immediately after starting the Adjustment Mode (05), single-sided test copying can be performed (nor-
mal copy mode).
In accordance with the procedure described below, make adjustment of each adjustment item so that
the measured values obtained from test copies satisfy the specification. By pressing the [FAX] button,
immediately after starting the Adjustment Mode (05), single-sided test copying can be performed (nor-
mal copy mode).
Fig.3-2
1
0
5
POWER
ENTER
INTERRUPT
Digital keys
START
: Key in codes.
<Operation keys>
<Display>
Current adjustment value
Adjustment value newly keyed in.
(If no entering, YYY is displayed.)
(If no entering, YYY is displayed.)
Power OFF/ON : Exit the Adjustment Mode.
Test copy
Digital keys
FAX
START
: Key in adjustment
values.
values.
Value ZZZ is stored
replacing values YYY.
replacing values YYY.
If the test copy does not
satisfy the specified values,
return to step 1 and
repeat the adjustment
procedure.
satisfy the specified values,
return to step 1 and
repeat the adjustment
procedure.
or
( CLEAR Use to make corrections)
100%
A
A3
TEST MODE
100%
A
TEST MODE
100%
A
Wait Warming Up
100%
A
COPYING
Code No.
100%
YYY
ZZZ
XXX
A3
A3
A3
A3
TEST MODE