Yamaha DSP5D Manual Do Utilizador

The meter section shows the input levels of the input channels and the output levels of the output channels.

A INPUT/MIX meters

Depending on the key you press, these meters indicate 
the input levels of input channels 1–24 or 25–48, or the 
output levels of MIX channels 1–24.

B [CH 1-24/ST IN/FX RTN] key

When this key is on, the INPUT/MIX meters indicate 
the input levels of input channels 1–24 and the ST IN/
FX RTN/MATRIX meters indicate the output level of 
ST IN channels (or FX RTN channels, depending on 
the FOLLOW INPUT LAYER setting) 1–4.

C [CH 25-48/FX RTN/ST IN] key

When this key is on, the INPUT/MIX meters indicate 
the input levels of input channels 25–48 and the ST IN/
FX RTN/MATRIX meters indicate the output level of 
FX RTN channels (or ST IN channels, depending on 
the FOLLOW INPUT LAYER setting) 1–4.

D [MIX/MASTER] key

When this key is on, the INPUT/MIX meters indicate 
the output levels of MIX channels 1–24 and the ST IN/
FX RTN/MATRIX meters indicate the output levels of 
MATRIX channels 1–8.

E [PEAK HOLD] key

Switches the peak hold function on/off for the meter 
display.

F ST IN/FX RTN/MATRIX meters

Depending on the key you press, these meters indicate 
the output levels of ST IN channels 1–4 or MATRIX 
channels 1–8.

G MASTER meters

These meters always indicate the output levels of the 
STEREO A/B channels and CUE bus.

You can use the keys of the meter section to specify the 
channels whose levels will be shown in the INPUT/MIX 
meters and ST IN/MATRIX meters. The following chan-
nels correspond to each key.

1

3

2

5

4

6

7

Input channels 

1–24

ST channels 

(or FX RTN channels) 

1–4

Input channels 

25–48

FX RTN channels 

(or ST IN channels) 

1–4

MIX channels 

1–24

MATRIX channels 

1–8