Yamaha DSP5D Manual Do Utilizador

[DATA] encoder to directly switch between “SEND” 
and “MASTER.”

D Encoder/Fader mode

Indicates the parameters that are assigned to the 
encoders/faders of the input channel strip.
The encoders can be assigned to MIX SEND 1–24, 
GAIN, ATT, PAN/BAL, LEVEL, or REMOTE. The fad-
ers can be assigned to LEVEL, MIX SEND 1–24, or 
REMOTE. For both the encoders and the faders, for 
parameters other than REMOTE, you can move the 
cursor and turn the [DATA] encoder to switch them 
directly.
If you select LEVEL for the encoders, the faders will be 
flipped; the most recently selected of the MIX SEND 1–
24 parameters will be assigned to the faders. Similarly, 
the faders will also be flipped if you select MIX SEND 
1–24 for the faders; the LEVEL parameter will be 
assigned to the encoders.

E INPUT CH (Input channel) layer

This shows the layer that is selected for the input chan-
nel strip in tandem with the [CH 1-24]/[CH 25-48] 
keys located in the input channel strip of the panel or 
the FADER MODE [A]–[F] keys of the FADER MODE 
section. (If the MIDI REMOTE layer is selected, this 
will indicate REMOTE 1-24.) For layers other than 
MIDI REMOTE, you can move the cursor and turn the 
[DATA] encoder to select them directly.

F FADER MODE

This is linked with the FADER MODE section on the 
panel, and indicates the function that is assigned to the 
faders of the DCA strip. You can also move the cursor 
and turn the [DATA] encoder to change this directly.

G ST IN/FX RTN (ST IN channel / Effect 

This shows the layer that is selected for the ST IN chan-
nel strip in tandem with the [ST IN] key / [FX RTN 1-
4] key located in the ST IN channel strip of the panel or 
the FADER MODE [A]–[F] keys of the FADER MODE 
section. (If the MIDI REMOTE layer is selected, this 
will indicate REMOTE 25-28. If a layer of a machine 
other than the input channel layer is selected, the 
machine ID number is also shown.) For layers other 
than MIDI REMOTE, you can move the cursor and 
turn the [DATA] encoder to select them directly.

H DIRECT RECALL/MUTE MASTER

This switches between the following two choices as the 
function of the [1]–[8] keys in the SCENE MEMORY 
section of the panel.

Keys [1]–[8] of the SCENE MEMORY section will 
directly recall the scene that was assigned in the SCENE 
screen.

Keys [1]–[8] of the SCENE MEMORY section will 
switch mute groups 1–8 on/off.

I USER DEFINED KEY BANK

Indicates the currently selected bank of User Defined 
keys. You can also move the cursor and turn the 
[DATA] encoder to change this directly.

Here you can select the function that you want to view in 
the display. These operate in the same way as the keys of 
the DISPLAY ACCESS section.

A Global functions

These buttons access functions that affect the entire 
PM5D.

B Output-related functions

These buttons access functions related to output chan-
nels (MIX channels, MATRIX channels, STEREO A/B 
channels).

C Input-related functions

These buttons access functions related to input chan-
nels (input channels, ST IN channels, FX RTN 
channels).

1

2

3