Yamaha DSP5D Manual Do Utilizador

J THRESHOLD (Threshold level)

Specifies the threshold level at which the compressor 
will operate. The input signal will start being com-
pressed when the key-in signal exceeds this level; 
compression will be removed when the signal falls 
below this level.

K RATIO

Specifies the ratio at which the input signal will be 
compressed when the key-in signal exceeds the thresh-
old level.

L ATTACK (Attack time)

Specifies the time from when the key-in signal exceeds 
the threshold level until compression begins.

M RELEASE (Release time)

Specifies the time from when the key-in signal falls 
below the threshold level until compression is 
removed.

N GAIN

Specifies the output level gain.

O KNEE

Select the sharpness at which the output level changes; 
the range is HARD or 1–5. HARD produces the sharp-
est change, and 5 produces the most gradual change.

These screens show the compressor settings for all output 
channels. Here you can also copy compressor settings 
between output channels.

A Compressor graph

This mini-graph shows the approximate compressor 
response for each output channel.
When you click the graph at which the cursor is cur-
rently located, the COMP PARAM screen for that 
channel will appear.
In this screen you can drag and drop the mini-graph 
from the desired channel to copy its compressor set-
tings. (When you drag and drop the mini-graph, a 

J

K

L

M

N

O

2

1

3

4