Yamaha DSP5D Manual Do Utilizador

C SET BY CUE (Assign by [CUE] key)

This specifies whether the [CUE] key will be used to 
make/cancel compressor link group assignments. 
While the compressor link group SET BY CUE button 
is on, pressing the [CUE] key of a channel that can be 
assigned to the corresponding group will assign the 
channel to the group. (Press the [CUE] key once again 
to cancel the assignment.)

D CLEAR

This button clears all output channels assigned to that 
compressor link group.

Here you can send the signal from MIX channels and STE-
REO A/B channels to the STEREO bus or the desired 
MATRIX bus.

A MATRIX bus

This is the number of the MATRIX bus to which the 
signal is sent. Paired MATRIX channels are indicated 
by a heart symbol displayed between them. You can 
click this symbol to enable/disable pairing.

B Send level

These knobs specify the send level of each signal that is 
sent from the MIX channel or STEREO A/B channel 
(vertical column) to the MATRIX buses (horizontal 
row).
The knobs shown in this area will depend on how the 
MATRIX channels are paired.

4

3

2

1

MIX channel

STEREO A/B channel