Yamaha DSP5D Manual Do Utilizador

D SET BY CUE (Assign by [CUE] key)

This specifies whether the [CUE] key will be used to 
make/cancel DCA group assignments. While the DCA 
group SET BY CUE button is on, pressing the [CUE] 
key of an input channel that can be assigned to the cor-
responding group will assign the channel to the group. 
(Press the [CUE] key once again to cancel the 
assignment.)

E CLEAR

This button clears all input channels assigned to that 
DCA group.

F MUTE

These buttons switch muting on/off for DCA groups 
1–8. They are linked with DCA [MUTE] keys 1–8 in 
the DCA strip of the panel.

G DCA faders

These faders adjust the levels of DCA groups 1–8. They 
are linked with DCA faders 1–8 in the DCA strip.

H CUE

These buttons cue-monitor DCA groups 1–8. They are 
linked with DCA [CUE] keys 1–8 in the DCA strip of 
the panel.

I DCA LEVEL SET

Use the following two buttons to operate DCA groups 
1–8 together.

Clicking this button will move DCA faders 1–8 to 
nominal level (0 dB).

Clicking this button will move DCA faders 1–8 to the 
–

∞ dB position.

Here you can specify the input channels that will be 
assigned to mute groups 1–8. Muting can be switched on/
off together for channels assigned to the same mute group.

Except for the fact that these settings apply to input chan-
nels, the display and operations are the same as in the 
OUTPUT DCA/GROUP function MUTE GROUP 
ASSIGN screen. Refer to p.259.

5

4

8

6

7

9