Yamaha DSP5D Manual Do Utilizador

In the FADER FLIP/ENCODER MODE section you can change the parameter that is assigned to the encoders, and exchange 
the parameters assigned to the faders and encoders.

A FADER [FLIP] key

If this key is on, the parameters controlled by the fad-
ers and encoders will be exchanged.

B Encoder mode indicator

This indicates the number of the MIX bus (1–24) 
selected by the MIX SEND SELECT keys (

6

) or the 

encoder function selected by keys 

3

–

5

.

C [PAN] key

This key selects pan (balance) as the parameter con-
trolled by the encoders. The encoder mode indicator 
will indicate “Pn” while this key is on.

D [GAIN/ATT] key

This key selects input sensitivity to the internal head 
amp (PM5D-RH model only) or external head amp 
device (AD8HR or AD824) or attenuation immedi-
ately after AD conversion as the parameter controlled 
by the encoders. The encoder mode indicator will indi-
cate “HA” (if input sensitivity to the head amp is 
selected) or “At” (if attenuator is selected) while this 
key is on.

➥ p.206).

E [ALT LAYER] key

This key selects “input level of the channel not 
included in the currently selected layer” as the parame-
ter controlled by the encoders. The encoder mode 
indicator will indicate “AL” while this key is on.

F MIX SEND SELECT [1]–[24] keys

These keys select the MIX bus (1–24) whose send level 
will be controlled by the encoders. When you press one 
of these keys, the LED of that key will light, and the 
encoder mode indicator will show the number of the 
MIX bus.

3

6

6

1

5

4

3

2