Yamaha DSP5D Manual Do Utilizador
PM5D/PM5D-RH V2 / DSP5D Owner’s Manual
Operating section
61
6
Output channel operations
STEREO A/B channel strip
The STEREO A/B channel strip lets you send the signal of the STEREO A/B channels to the MATRIX bus, and adjust the out-
put level of the STEREO A/B channels.
put level of the STEREO A/B channels.
A [TO MATRIX] LED
This LED will light when the signal sent from the STE-
REO channel to the MATRIX bus is on.
REO channel to the MATRIX bus is on.
B [COMP] LED
This indicates the operating status of the compressor
for the STEREO channel. This will be dark when the
gain reduction amount is 0 dB, dimly lit when it is 0–
10 dB, and lit when it is greater than 10 dB.
for the STEREO channel. This will be dark when the
gain reduction amount is 0 dB, dimly lit when it is 0–
10 dB, and lit when it is greater than 10 dB.
C STEREO A/B [SEL] key
This selects the STEREO A or STEREO B L/R channels
for editing in the SELECTED CHANNEL section or
display. The L/R channels will alternate each time you
press the key.
for editing in the SELECTED CHANNEL section or
display. The L/R channels will alternate each time you
press the key.
D STEREO [MONO] key
This switches the STEREO B channel to monaural. The
status will alternate between monaural and stereo each
time you press the key.
status will alternate between monaural and stereo each
time you press the key.
E STEREO [ON] key
This switches the STEREO channel on/off. If this key is
off (LED dark), no signal will be output from that STE-
REO channel.
off (LED dark), no signal will be output from that STE-
REO channel.
F STEREO fader
This 100 mm fader adjusts the output level of the STE-
REO channel.
REO channel.
G STEREO [CUE] key
This is used to monitor the STEREO A/B channel via
the Cue Monitor/Solo function.
the Cue Monitor/Solo function.
Items in the STEREO A/B channel
strip
strip
7
4
6
5
3
2
1