Yamaha DSP5D Manual Do Utilizador

The SELECTED CHANNEL section lets you edit the mix parameters of the currently selected input channel or output chan-
nel; it corresponds to a channel module of a conventional analog mixer.
This section controls the channel that was last selected by pressing its [SEL] key. (In the case of an ST IN channel, FX TRN 
channel, or STEREO A/B channel, you will select either the L or the R channel.) However, you will be able to edit essentially all 
of the mix parameters (head amp settings, EQ/compressor/gate settings, output to the STEREO bus, DCA group and mute 
group assignments, etc.) using panel controls.

Here you can assign the currently selected channel to DCA 
groups and mute groups. (For details on DCA groups and 
mute groups 

➥ p.82, 83)

A DCA [1]–[8] keys

These keys assign the selected channel to DCA groups 
1–8. The key LED for the assigned DCA group(s) will 
light.
Input channels can use DCA groups 1–8, and output 
channels can use DCA groups 7/8. For DCA groups 7/
8, input channels and output channels can both exist in 
the same-numbered group.

B MUTE [1]–[8] keys

These keys assign the selected channel to mute groups 
1–8. The key LED for the assigned mute group(s) will 
light.
Mute groups 1–8 allow you to mix input channels and 
output channels.

C [RECALL SAFE] key

This key switches Recall Safe on/off for the selected 
channel. If this key is on, the parameters of the corre-
sponding channel will not be affected when a scene is 
recalled. The applicable parameters can be specified in 
the RECALL SAFE screen (SCENE function) 
(

➥ p.182).

D [MUTE SAFE] key

This key switches Mute Safe on/off for the selected 
channel. If this key is on, the corresponding channel 
will be temporarily excluded from mute groups.

E Level meter

This indicates the input/output level of the selected 
channel.

3

4

5

1

2