Viewera V172SV Manual Do Utilizador

26

 Check if you are using the standard power adapter coming with the monitor.

 Check if the power cord is securely connected and the LED light on the power adapter comes on.

    If the LED light on the power adapter is off, then it is required to replace the power adapter.

              If  the  LED  light  on  the  monitor  power  and  the  power  adapter  both  come  on,  please  contact 

support@viewera.com for assistance.

 Check if the VGA cable is tightly connected between the video output connector on the video card and the 

video input connector on the monitor.

 Check if your video card driver is correctly installed. If possible, please re-install or update your video card 

driver.



Enter the Image menu in the OSD and then select “Auto Adjust” to adjust the display to optimum.



Refer to Chapter 2.6, set your monitor to its native resolution of 1680 by 1050.

 Check the connection of signal cable and make sure the two screws on the connector are securely tightened.
 Chick if there is any pin on the signal cable bent or broken off. If there is, it is required to replace the signal 

cable.

 Enter the Color Temperature menu and select AUTO Color to recall the factory settings for color hue.