Kenwood DDX4033BTM Manual Do Utilizador
English
47
Registering/Changing the
functions
functions
1
On <Top Menu>:
2
3
4
Press a steering remote
controller button to register/
change.
change.
5
Select a function to assign.
Using the steering remote controller
You can assign the functions to the keys of the remote controller on the steering wheel.
• This function is available only when your vehicle is equipped with the electrical steering
• This function is available only when your vehicle is equipped with the electrical steering
remote controller.
• You can only register/change the functions while you are parked.
• If your steering remote controller is not compliant, learning may not be completed and an
• If your steering remote controller is not compliant, learning may not be completed and an
error massage may appear.
6
Repeat
steps
4
and
5
as
necessary.
7
Press
[Done].
• You can have the unit learned all buttons
at a time. In that case, press the all buttons
one at a time and after pressing all of them,
touch [Done] in Steering Remote Control
Setting screen. However, new functions
cannot be learned after this operation.
one at a time and after pressing all of them,
touch [Done] in Steering Remote Control
Setting screen. However, new functions
cannot be learned after this operation.
• When changing the function already
learned, touch the button you want to
change in step
change in step
4
and then touch to select
the changed function from the function
list.
list.
• Confirm the contents of the settable
function on the function list. You cannot
edit the function list.
edit the function list.
Initializing the settings
1
In step 2 in the left column:
2
EN_GET0908-001A_MX.indb 47
EN_GET0908-001A_MX.indb 47
12/11/13 11:45
12/11/13 11:45