Sharp PNE802 Manual Do Utilizador

11

E

Caution

•  Be sure to turn off the main power switch and disconnect 

the plug from the power outlet before connecting/

disconnecting cables. Also, read the manual of the 

equipment to be connected.

•  Be careful not to confuse the input terminal with the output 

terminal when connecting cables. Accidentally reversing 

cables connected to the input and output terminals may 

cause malfunctions and the other problems.

TIPS

•  Images may not be displayed properly depending on the 

computer (video card) to be connected.

•  A screen with 1920 x 1080 resolution may not be displayed 

correctly on PC RGB. In this case, check the settings of 

your computer (video card) to verify that input signals 

conform to specifications of this monitor. (See page 53.)

•  If there is a check box to disable EDID in display control 

panel, check it when using PC RGB.

•  Use the automatic screen adjustment when a PC screen 

is displayed for the first time using PC D-SUB or PC RGB, 

or when the setting of the PC is changed. The screen is 

adjusted automatically when SELF ADJUST in the OPTION 

menu is set to ON.

•  If the audio output from the playback device is connected 

directly to speakers or other devices, the video on the 

monitor may appear delayed from the audio portion. 

Audio should be played through this monitor by connecting 

the playback device to the monitor’s audio input, and 

connecting the monitor’s audio output to the speakers or 

other devices.

•  The audio input terminals used in each input mode are 

factory-set as follows.

PC D-SUB, PC DVI-D, PC RGB Audio input terminal
AV DVI-D

Audio1 input terminal

AV COMPONENT (BNC),

AV S-VIDEO , AV VIDEO (BNC) Audio2 input terminal
AV COMPONENT (D-SUB),

AV VIDEO (D-SUB)

Audio input terminal

PC HDMI, AV HDMI

PC/AV HDMI input terminal

  1.  PC/AV HDMI input terminal

•  Use a commercially available HDMI cable (conforming to 

the HDMI standard).

•  Set HDMI of INPUT SELECT on the OPTION menu 

according to the device to be connected.

•  Select the audio input terminal to be used in PC HDMI 

or AV HDMI of AUDIO SELECT on the OPTION menu. 

When HDMI is selected, connection to the audio input 

terminal is unnecessary.

•  Set D-SUB of INPUT SELECT on the OPTION menu 

according to the device to be connected.

•  Common terminal for AV COMPONENT and AV VIDEO.

•  When the PN-ZB01 (optional) is attached, select the audio 

input terminal to be used in PC D-SUB of AUDIO SELECT 

on the OPTION menu.

•  To use with AV VIDEO (D-SUB), connect the green 

terminal to the device’s video output.

•  Use an audio cable without resistance.

•  When the PN-ZB01 (optional) is attached, set the audio 

input terminal used for each input mode in AUDIO 

SELECT on the OPTION menu.

•  The output sound varies depending on the input mode.

•  The volume of the output sound can be fixed by setting 

AUDIO OUTPUT (RCA) on the OPTION menu.

•  It is not possible to control the sound output from the 

audio output terminals with the AUDIO menu.

•  You can control the monitor from a PC by connecting a 

commercially available RS-232 straight cable between 

these terminals and the PC.