Panasonic BT-4LH310 Manual Do Utilizador

48

49

The underlined values are the factory defaults.

LOCAL

REMOTE

Selects operation. (With control lock)

[LOCAL]      Enables front panel operation (including controls that use the GPI 

function).

[REMOTE]   Enables remote operation (control using RS-232C or RS-485; the 

front panel operation is locked).

• Powering on/off, VOLUME operations, GPI control, and menu 

display are available when the lock is engaged.

• Only the settings of the [CONTROL] and [LOCK ENABLE] menu 

items can be changed when the lock is engaged.

• The rotary knob <PICTURE> is disabled when the lock is en-

gaged.

• Operation when the lock is engaged is in accordance with the 

[LOCK ENABLE] setting.

• The 

 mark is displayed in the operating status display, menu 

display ([MAIN MENU] (main menu), [FUNCTION] menu, and 

[INPUT SELECT] menu), [PICTURE] (picture adjustment) menu, 

and function display screens when the lock is engaged.

MAIN MENU
  MAEKER
  VIDEO CONFIG
  MEASURE SETUP
  SYSTEM CONFIG
  FUNCTION
  AUDIO

Mark

*

DISABLE

INPUT

FUNCTION

INPUT+FUNC.

Selects whether to enable or disable the <INPUT SELECT> and <FUNCTION> 

button operations when [REMOTE] is selected in [CONTROL].

[DISABLE]           Disables the <INPUT SELECT> and <FUNCTION> button 

operations.

[INPUT]               Enables the <INPUT SELECT> button operation.

[FUNCTION]       Enables the <FUNCTION> button operation.

[INPUT+FUNC.]    Enables the <INPUT SELECT> and <FUNCTION> button 

operations.

Displays GPI related menus.

0 to 126

(Factory default 

setting: 0)

Sets the ID number of the unit for communication using RS-485.

*

1

 

This is only available when [CONTROL] is [REMOTE].

 

„

DISABLE

ENABLE

Enables and disables the GPI functions.

[DISABLE]  Disables       [ENABLE] Enables

UNDEF

INPUT SDI

INPUT DisplayPort DUAL

INPUT DisplayPort SINGLE 

INPUT HDMI DUAL

INPUT HDMI SINGLE

INPUT INT-SG

R-TALLY

G-TALLY

MONO

Sets the PIN assignment of the GPI input connector.

The items that can be set are the same for each terminal.  

(For details, refer to page 54)