Philips S1D13505 Manual Do Utilizador
Page 8
Epson Research and Development
Vancouver Design Center
S5U13505-D9000
Evaluation Board User Manual
X23A-G-002-04
Issue Date: 01/02/05
2 Features
• S1D13505 Embedded RAMDAC LCD/CRT controller.
• 4/8-bit monochrome or 4/8/16-bit color LCD interface for single-panel, single-drive displays.
• 8-bit monochrome or 8/16-bit color LCD interface for dual-panel, dual-drive displays.
• Direct support for 9/12-bit TFT/D-TFD; 18-bit TFT/D-TFD is supported to 64K colors (16-bit
data).
• Direct CRT support to 64K colors using the S1D13505 embedded RAMDAC.
• Up to 16 shades of gray using Frame Rate Modulation (FRM) on monochrome passive LCD
panels.
• Up to 4096 colors on color passive LCD panels; three 256x4 Look-Up Tables (LUT) are used
to map 1/2/4/8 bpp modes into these colors, 15/16 bpp modes are mapped directly using the
four most significant bits of the red, green and blue colors.
four most significant bits of the red, green and blue colors.
• Up to 64K colors on TFT/D-TFD and CRT; three 256x4 Look-Up Tables are used to map
1/2/4/8 bpp modes into 4096 colors, 15/16 bpp modes are mapped directly.
• On-board 2M byte EDO-DRAM display buffer.
• On-board adjustable LCD bias voltage power supply.
• SmallTypeZ x 2 form factor (requires two side-by-side SmallTypeZ slots).
2.1 S1D13505 Embedded RAMDAC LCD/CRT Controller
The S1D13505 is a low cost, low power, color/monochrome LCD/CRT controller with an embedded
RAMDAC capable of interfacing to a wide range of CPUs and LCD displays.
RAMDAC capable of interfacing to a wide range of CPUs and LCD displays.
The S1D13505 supports LCD interfaces with data widths up to 16-bits. Using Frame Rate
Modulation (FRM), it can display 16 shades of gray on monochrome panels, up to 4096 colors on
passive panels and 64K colors on active matrix TFT/D-TFD. CRT support is handled through the
use of an embedded RAMDAC allowing simultaneous display of both the CRT and LCD displays.
Modulation (FRM), it can display 16 shades of gray on monochrome panels, up to 4096 colors on
passive panels and 64K colors on active matrix TFT/D-TFD. CRT support is handled through the
use of an embedded RAMDAC allowing simultaneous display of both the CRT and LCD displays.
In this design, the S1D13505 has a 3.3V supply voltage for both logic and the embedded RAMDAC.
For complete details on register functionality and programming, refer to the S1D13505 Hardware
Functional Specification, document number X23A-A-001-xx, and the S1D13505 Programming
Notes and Examples, document number X23A-G-003-xx.
Functional Specification, document number X23A-A-001-xx, and the S1D13505 Programming
Notes and Examples, document number X23A-G-003-xx.
2.1.1 Display Buffer
The S1D13505 supports a 512K byte or 2M byte FPM-DRAM or EDO-DRAM display buffer. On
the S5U13505-D9000 evaluation board a 1Mx16 EDO-DRAM (2M byte) is used to provide memory
for all supported display resolutions, and when smaller display sizes are used, to provide multiple
“pages” of memory.
the S5U13505-D9000 evaluation board a 1Mx16 EDO-DRAM (2M byte) is used to provide memory
for all supported display resolutions, and when smaller display sizes are used, to provide multiple
“pages” of memory.