Pioneer PRO-FHD1 Manual Do Utilizador

En

For audio, the Plasma Display supports the following:

• Linear PCM (STEREO 2ch)

• Sampling frequency: 32 kHz, 44.1 kHz, 48 kHz

• PC signals are out of correspondence.

• HDMI input display on top right corner of the Plasma Display 

(blue box) everytime the external devices changing the 
output format, this might causing the blank screen while 
detecting the signal format.

When using the INPUT2 or INPUT3 HDMI terminal:

To activate the HDMI terminal:

When you use the INPUT2 or INPUT3 HDMI terminal, use the 
following procedure to activate the terminal.

Press 

HOME MENU.

Select “Setup” ( /  then 

ENTER (ENTER/DISP.)).

Select “INPUT2” or “INPUT3” ( /  then 

ENTER (ENTER/

DISP.)).

Select “Video” or “Audio”  ( / ).

Set the “Video” or “Audio” setting.

Press 

HOME MENU, INPUT 1 to INPUT 6 (INPUT) to exit 

the menu.

To specify the type of digital video signals:

Repeat steps 1 to 2 provided for “

terminal”.

Select “Video” ( / ).

Select the type of digital video signals ( / ).

• If you select “Auto”, an attempt will be made to identify 

the type of digital video signals when digital video 
signals are received.

Press 

HOME MENU, INPUT 1 to INPUT 6 (INPUT) to exit 

the menu.

• If you select a parameter other than “Auto”, make such a 

setting that results in natural color.

• If the images do not come in clearly, specify another digital 

video signal type.

• For the digital video signal types to be specified, check the 

operation manual that came with the connected equipment.

To specify the type of audio signals:

When you use the INPUT2 or INPUT3 HDMI terminal, use the 
following procedure to specify the type of audio signals.

Repeat steps 1 to 2 provided for “

terminal”.

Select “Audio” ( / ).

Select the type of audio signals ( / ).

• If you select “Auto”, an attempt will be made to identify 

the type of audio signals when audio signals are 
received.

Press 

HOME MENU, INPUT 1 to INPUT 6 (INPUT) to exit 

the menu.

• If no sound is output, specify another audio signal type.

• For the audio signal types to be specified, check the 

operation manual that came with the connected equipment.

• Depending on the equipment to be connected, you also need 

to connect analogue audio cables.

720*480p@59.94/60 Hz

720(1440)*480i@59.94/60 Hz

AUDIO cable 
(commercially available.)
Connect the AUDIO cable only 
when inputting analogue audio 
signals.

HDMI cable having the 
HDMI mark 
(commercially available.)

Automatically identifies input digital video signals.

Digital Component Video signals (4:2:2) locked

Digital Component Video signals (4:4:4) locked

Digital RGB signals (16 to 235) locked

Digital RGB signals (0 to 255) locked

Automatically identifies input audio signals.

Accepts digital audio signals.

Accepts analogue audio signals.