NEC LCD2010X Manual Do Utilizador

LAST DETECT: 

The video input has to be switched to the “LAST DETECT”

mode. When the monitor is displaying a signal from the current source

and a new secondary source is supplied to the monitor, then the monitor

will automatically switch to the new video source. When current video

input signal is not present, then the monitor searches for a video signal

from the other video input port. If the video signal is present in the other

port, then the monitor switches the video source input port to the new

found video source automatically. The monitor will not look for other video

signals while the current video source is present.

DVI SELECTION: 

This function selects the DVI input mode. When the DVI

selection has been changed, you must restart your computer.

DIGITAL: 

DVI digital input is available.

ANALOG: 

DVI analog input is available.

SOUND:

 Adjusts the volume of the earphones jack.

LANGUAGE:

 OSM

™

 control menus are available in seven languages.

OSM POSITION:

 You can choose where you would like the OSM control

image to appear on your screen. Selecting OSM Location allows you to

manually adjust the position of the OSM control menu left, right, up or down.
OSM TURN OFF:

 The OSM control menu will stay on as long as it is use. In the

OSM Turn Off submenu, you can select how long the monitor waits after the

last touch of a button to shut off the OSM control menu. The preset chocies are

10, 20, 30, 60 and 120 seconds.
OSM LOCK OUT: 

This control completely locks out access to all OSM control

functions. When attempting to activate OSM controls while in the Lock Out

mode, a screen will appear indicating the OSM controls are locked out. To

activate the OSM Lock Out function, press PROCEED, then   and hold down

simultaneously. To de-activate the OSM Lock Out, press PROCEED, then 

and hold down simultaneously.
FACTORY PRESET:

 Selecting Factory Preset allows you to reset all OSM control

settings back to the factory settings. The RESET button will need to be held

down for several seconds to take effect. Individual settings can be reset by

highlighting the control to be reset and pressing the RESET button.
RESOLUTION NOTIFIER:

 This optimal resolution is 1280 x 1024. If ON is

selected, a message will appear on the screen after 30 seconds, notifying you

that the resolution is not at 1280 x 1024.

10

2010X.wpc

7/13/00, 5:01 PM

12