Lian Li PC-X900B Folheto

Remove the HDD cage for long 
PSU.

Loosing screws to remove fan 
module.

Follow the arrow to remove the filter, press the 
plastic clips to release the washable air filter.

Loosing four thumb screws to 
remove the PSU mounting bracket. 

Assembling the power supply with 
PSU mounting bracket, and push 
in gently.

Fasten four thumb screws onto the 
case to secure.

4. By pressing plastic 
    handle to release the 
    mounting bracket.

5. Push the CD-ROM into the ODD cage 
    module, close the bracket to secure.
6. Reverse previous steps for installation 
    bezel & converter.

Adding the rubber pad to ODD's 
eject bottom, when 5.25" ODD 
bezel couldn't reach to the ODD.

1. Remove the 5.25" to 3.5" converter.

2. Remove the 5.25" ODD 
    bezel.

3. Slide the 5.25" ODD bezel 
    downwards to remove it.

If you wish to use the 
5.25" ODD bezel, 
please adjust the metal 
pin position on the 
mounting bracket

Secure the stand-off on the M/B tray which match 
with the M/B fix points, place the M/B on the 
stand-off fasten with the thumb screws to secure.

!

!

!

1

2

Open the aluminum latch to 
remove the PCI slot bracket.

Push the card into the PCI slot,
close the aluminum latch to secure
the card.

Place the PSU on the stand, and 
push again the rear panel.

Place the PSU bracket into 
according slot as shown.

Lock the PSU bracket to secure the PSU.
* For transportation, please place screw 
   to secure   the PSU 

Place the water tube through
the rabber cover.

C50.X9000.00E-2