Panasonic AJ-HRW10G Manual Do Utilizador

21

The basic processing of the RAID1 function is set.

A

B

C

D

E

A   Rebuild Rate

Set the rebuilding rate.
While the rebuilding process is underway, both 
playback and access from an external source via 
the LAN can be performed at the same time.
When rebuilding and playback or rebuilding and 
external access have been performed at the same 
time, the rate of not only the rebuilding but the 
playback or external access as well will be reduced.

For details on the rates provided by the LOW 
button, MEDIUM button and HIGH button, refer to 
the table below.

Rebuilding time

Slow

Normal*

Fast

Playback frame 

skip amount

Low 

number of 

frames

Middling 

number of 

frames

High 

number of 

frames

*  The rebuilding time is about 2 hours for 500 GB.

The rebuilding times given are estimates only 
and will vary depending on the HDD used and 
operating environment.

B    Automatic Rebuilding Status

    Rebuild automatically.

    Rebuild manually.
     To initiate rebuilding, press the START button of 

the Rebuild tab.  

C     Buzzer Status

These control the ON/OFF statuses of the BUZZER 
on the RAID board.  This BUZZER sounds when 
trouble has occurred on the RAID button.

    Buzz when HDD is plugged.

    Be quiet all the time.

D  APPLY button

Register currently set details.

E  CLOSE button

Return to the main screen.