ONKYO BR925 Manual Do Utilizador

Página de 84
32
Listening to the Radio
The CD/HDD receiver won’t pick up any radio signals without an antenna connected, so you must connect the antenna 
to use the tuner (see page 17).
Adjusting the Antennas
Tuning into AM/FM Radio Stations
1
Press the [ENTER] repeatedly to select the tuning mode.
• Auto Tuning Mode
The AUTO indicator appears and stereo radio recep-
tion is possible.
• Manual Tuning Mode
The AUTO indicator is not displayed and radio reception will be in mono.
2
Use the Fast Reverse and Fast Forward [
5]/[4] buttons to tune into 
a station.
In Auto tuning mode,
 once a station is found, tuning stops automatically.
Radio Frequency can be changed in 0.05 MHz steps for FM and 9 kHz or 10 kHz steps 
for AM.
In Manual Tuning mode, the frequency stops changing when you release the button. 
Press the button repeatedly to change the frequency one step at a time.
ENTER
( TUNING     /      )
    /      
Switch the input source to 
FM or AM (see page 24).
FM 87.50 MHz – – ch
AUTO
FM STEREO
TUNER
Band
Frequency
When tuned into a station, the Tuned 
 indicator appears. 
When tuned into a stereo FM station, the FM STEREO indicator 
appears as well.
AUTO indicator
1
2
Change the direction of the 
antenna to achieve the best 
reception.
Affix the antenna with a thumbtack. (Do not 
push the thumbtack through the antenna.)
Caution: 
Be careful not to prick your finger!
Adjusting the AM antenna
Adjust the location and position of the AM 
antenna while listening to an AM station to 
achieve the best reception.
Adjusting and installing the FM antenna
Choose a location for the FM antenna while listening to an FM station.