ONKYO BR925 Manual Do Utilizador

66

With the record timer, you can automatically turn on the 
CD/HDD receiver, start recording, and turn off the CD/
HDD receiver at a specified time. This timer is conve-
nient when you want to record music or programs while 
you are out, or record late-night broadcasting programs.

Before setting the timer:
• You must set the clock before you can set the timers.
• Before setting a timer to turn on the radio, you must 

preset the station you want to use (see pages 34 and 35). 

Notes:
• When four timers have already been programmed, cancel 

one of the timers already set, and then set a new one.

• Some operation cannot be done about one minute before 

the On time of the timer.

• To ensure that the first few seconds of a program are 

recorded, set the On time slightly ahead of the program’s 
start time (about one minute).

To hear what’s being recorded during recording: 
When the record timer starts from the Standby mode, the 
output of the CD/HDD receiver is muted. Press the 
[MUTING] button or VOL [

q]/[w] button to unmute the 

CD/HDD receiver.

Select a timer number.
Use the Up and Down [

q]/[w] buttons 

to select Timer1, 2, 3, or 4 and then 
press [ENTER]. The Timer indicator 
lights up and the selected timer number 
flashes on the display.

Set the status of the timer.
Use the Up and Down [

q]/[w] buttons 

to select “On”, and then press 
[ENTER].

Set the type of the timer.
Use the Up and Down [

q]/[w] buttons 

to select “Rec”, and then press 
[ENTER].

Select the source you want to play.
Use the Up and Down [

q]/[w] buttons 

to select the source and then press 
[ENTER].
You can select the following sources:
FM, AM, or LINE
Select a preset for FM or AM.

Select the source you want to 
record.
Use the Up and Down [

q]/[w] buttons 

to select the source, and then press 
[ENTER].
You can select the following sources:
HDD, USB, or TAPE
When selecting an external component, 
you need to use an 

u-capable compo-

nent and set the Input Display name to 
match the type of component (see 
page 45).

Timer 1

  

:Off

Timer  Mode

Set the day and time.
Use the Up and Down [

q]/[w] buttons 

to select “Once” or “Every”, and then 
press [ENTER].
Select “Once” for on-off operation. 
Select “Every” to perform the same 
operation every week. Use the Up and 
Down [

q]/[w] buttons to set the day 

and then press [ENTER].
If you selected “Once”:
Use the Up and Down [

q]/[w] buttons 

to select the day, and then press 
[ENTER].
If you selected “Every”:
Use the Up and Down [

q]/[w] buttons 

to select the day, “Everyday”, or “Days 
Set”, and then press [ENTER].
You can select the following:

If you selected “Days Set”, use the Up 
and Down [

q]/[w] buttons to select the 

first day, and then press [ENTER]. Use 
the Up and Down [

q]/[w] buttons to 

select the last day, and then press 
[ENTER]. You can select only consec-
utive days.

Set the On time and Off time.
Use the Up and Down [

q]/[w] buttons 

to select the time, and then press 
[ENTER]. You can also use the number 
buttons.

Set the volume.
Use the Up and Down [

q]/[w] buttons 

to adjust the volume, and then press 
[ENTER].

Note:
Be sure to set the CD/HDD receiver to 
Standby, otherwise the timed operation 
will not work.

SUN

TUE

MON

Days Set

Everyday

WED

THU

SAT

FRI