Seagate ST9500621SS Manual Do Utilizador
![Seagate](https://files.manualsbrain.com/attachments/b8a65e13882738a617b4fb1dec35c49349976167/common/fit/150/50/2b4b03599a6f710d30699589ed58ececb8b6db2f0c51d2afc623a22705ee/brand_logo.png)
Constellation.2 SAS Product Manual, Rev. H
57
[1] Constellation.2 drives can format to 512, 520 or 528 bytes per logical block.
[2] Warning. Power loss during flash programming can result in firmware corruption. This usually makes the
[2] Warning. Power loss during flash programming can result in firmware corruption. This usually makes the
drive inoperable.
[3] Reference Mode Sense command 1Ah for mode pages supported.
[4] Y = Yes. Command is supported.
[4] Y = Yes. Command is supported.
N = No. Command is not supported.
A = Support is available on special request.
A = Support is available on special request.
[5] Approximately 1.5 increase in time to complete this command for a SED drive versus a non-SED drive of
the same capacity.
Verify (12)
AFh
N
Verify (16)
AFh
Y
Verify (32)
7Fh/000Ah
N
Write (6)
0Ah
Y
Write (10)
2Ah
Y
DPO bit
Y
FUA bit
Y
Write (12)
AAh
N
Write (16)
8Ah
Y
Write (32)
7Fh/000Bh
N
Write and Verify (10)
2Eh
Y
DPO bit
Y
Write and Verify (12)
AEh
N
Write and Verify (16)
8Eh
Y
Write and Verify (32)
7Fh/000Ch
N
Write Buffer (modes 0, 2, supported)
3Bh
Y (non-SED drives only)
Write Buffer
3Bh
Y (non-SED drives only)
Firmware Download option (modes 4, 5, 7)
Y (SED drives only)
Write Long (10)
3Fh
Y
Write Long (16)
9Fh/11h
Y
41h
Y
PBdata
N
LBdata
N
93h
Y
Write Same (32)
7Fh/000Dh
N
XDRead
52h
N
XDWrite
50h
N
XPWrite
51h
N
Table 7:
Supported commands
Command name
Command code
Supported